| After-sales Service: | on Line and to Door Service |
|---|---|
| Warranty: | One Year |
| Structure: | Vertical Drilling Machine |
| Layout: | Vertical |
| Controlling Mode: | CNC |
| Number of Shaft: | 6 |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier 
| Model | JGZ3635 |
| Angle size(mm) | 140х140х10~360х360х35 |
| Marking force(kN) | 1030 |
| Max. length of blank(m) | 14 |
| Max. length of finished(m) | 14 |
| No. of drill on each side(piece) | 3 |
| No. of character group(piece) | 1 |
| No. of character in each character size(piece) | 15 |
| Character side(mm) | 14×10×19 |
| Range of back mark (mm) | 50-220 (stepless) |
| CNC axes(piece) | 3 |
| Spindle rotation speed(r/min) | 180-560,Transducer stepless adjustment |
| Feeding speed of angle(m/min) | 40 |
| Diameter of drilling(mm) | Ф17.5~Ф40 |
| Stroke of Spindle(mm) | 180 |
| Processing precision | Accordance with GB2694-81 |
| Programming mode | Input by keyboard, RS232 interface, floppy disk and USB interface |
| Overall dimensions (mm) | 32000×7500×3150 |
| Gross weight of machine(kg) | Approx.16800 |
| Total power(kW) | 35 |
| No. | Name | Manufacturer | |
| Main Electric Components | |||
| 1 | PLC | Japan YOKOGAWA | |
| 2 | Servo Motor | Japan YASKAWA | |
| 3 | Servo Driver | ||
| 4 | Main motor | ZHENG HUA | |
| 5 | Transducer | INVT | |
| 6 | Business Computer | China Lenovo | |
| 7 | Photoelectric Switch | AUTONICS | |
| 8 | Proximity Switch | AUTONICS | |
| 9 | Push button | German SIEMENS | |
| 10 | Indicator light | German SIEMENS | |
| 11 | Contactor switch | German SIEMENS | |
| 12 | Stroke Switch | Taiwan TEND | |
| Main Hydraulic Pressure Components | |||
| 1 | Hydraulic Valves | Italy ATOS | |
| Main Pneumatic Components | |||
| 1 | Carriage | Up Cylinder | Taiwan AirTAC |
| 2 | Clamp Cylinder | Taiwan AirTAC | |
| 3 | Electromagnetic Gas-valve | Taiwan AirTAC | |
| 4 | Unload Conveyor | Overturn Cylinder | Taiwan AirTAC |
| 5 | Electromagnetic Gas-valve | Taiwan AirTAC | |
| No | Name | Material | Qty. | Remark |
| 1 | Upper clamping jaw | T10A | 2 | Including installed in machine |
| 2 | Nether clamping jaw | T10A | 2 | Including installed in machine |
| 3 | Character box | T10A | 2 | Including installed in machine |
| 4 | Characters | T10A | 2 set | Including installed in machine |
| 5 | Proximity switch | Normal open | 1 | AUTONICS |
| 6 | Proximity switch | Normal close | 1 | AUTONICS |
| 7 | Proximity switch | 1 | AUTONICS | |
| 8 | Travel switch | TZ-8104 | 1 | Taiwan TEND |
| 9 | Photoelectric switch | 1 | AUTONICS | |
| 10 | Combination pad | 1 sets | GB982-77 | |
| 11 | Reducing sleeve | Φ17.5~Φ40 | 1 set | |
| 12 | O ring | Exported famous brand | 1 set | GB1235-76 |
| 13 | Tools with equipment | 1 set | ||
| 14 | Standby paint | 1 pail | ||
| 15 | Operation Manual & Attached Drawings | 2 sets | ||
| (Option unit) Cutting Unit (Max. Size :200x200x20mm) |
Double blade cutting |
| This unit consists of frame machine body, hydraulic pressure dynamic cylinder, upper blade setup, lower blade setup, and front bracket tank etc. The front bracket tank avoids angle steel to strike lower blade. The lower blade setup can adjust the clearance according to angle steel thickness to ensure the cutting quality. It cuts different standards of angle steel, according to the order of computer. |
| The Drilling Unit |
We solved the fatal problem of this machine. During drilling, the cooling water will go inside the drills, drill will be locked. Now we make new design for it. The cooling water will not go inside of spindle and drills will not be locked by rust. We add a cover on top of the guide device of spindle, which can prevent dust and scraps from going inside of piston unit of guide device. It will protect the spindle and prolong its life. (This is our patent) |
| Drilling Unit: The unit is consists of two slanting 45°frames, four vertical plates, two hydraulic drilling heads and two sets of servo drivers used for controlling the stadia adjustment. This unit can be installed three different standards of drills on each side. It can choose drilling heads automatically according to computer instruction. The position of stadia is located by servo motor, which drives drilling head to move up and down through the transmission of ball screw, thus to achieve the requirement of stadia position. It can drill many rows and different diameters holes on two wings of angle steel. |
| The feeding of three drilling spindle controlled by three cylinder, besides, our machine equipped with the balancing cylinder, this cylinder help reduce the pressure of the pump, extend the working life of pump and ball screws. |
| The Marking Unit |
| Our new close type marking unit, more stable and longer life |
| Marking characters (36 pics : 0-9, A-Z) |
| Marking Unit: This unit is consists of fixed lathe bed, movable lathe bed, hydraulic pressure head and manual adjustment device. According to the order of computer, the unit marks on places required on the drawings. For making the marks clear and endurable, and avoiding the angle steel abrades character heads, it adds the functions of loading oil cylinder and lifting movable lathe bed. For satisfying the processing scope, it adds manual adjustment device, which can change the position of characters to adapt different standards angle steel. |
| Chip Cleaner |
| Equipped with automatic chip cleaner |
| Hydraulic station (Denison vane pump) |
Famous brand vane pump, low noisy, better quality, occupy smaller place Italy ATOS valves |
Accumulator, faster drillinging speed |
| This unit is consists of oil box, high pressure pump group and lower pressure pump group, cooler, main valve group and other controlling valve groups. The detail refers to the Hydraulic Pressure System Overview. |
| Work Pieces |
Packaging For Foreign Customers (For One Angle Line Need One 40HQ And One 20GP Container) |
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}