| Customization: | Available |
|---|---|
| After-sales Service: | on Line and to Door Service |
| Warranty: | One Year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| No. | Item | YBJZ100 |
| 1 | Machine Layout Area | 5*3.5 M |
| 2 | No. of Hosts | 1 Set |
| 3 | No. of Workbench Bases | 1 Set |
| 4 | No. of Y-Slide | 1 Set |
| 5 | No. of X-direction Slide | 1 Set |
| 6 | No. of Clamps | 2 Sets |
| 8 | Pneumatic control system | 1 Set |
| 9 | Hydraulic control system | 1 Set |
| 10 | Buyer Preparation Working | Installation Site-cement foundation, embedded slabs and anchor bolts required by equipment, make the foundation according to the foundation plan provided by the supplier |
| 1 | CNC Controller system | PLC control system |
| 2 | Drive System | Panasonic Servo Motor |
| No. | Item | YBJZ100 |
| 1 | Processing plate size | 1500*800mm |
| 2 | Processing plate thickness | 5-25mm |
| 3 | Punching force | 1000KN |
| 4 | Maximum punching diameter | Φ26mm (50mm for drilling) |
| 5 | Total number of modules | 4 Pcs |
| 6 | Number of punching die | 2 Pcs |
| 7 | Number of print header groups | 1 Group |
| 8 | Prefix | 10 Pcs |
| 9 | Header size | (L*W*H)14*10*19mm |
| 10 | Number of CNC axes | 2 |
| 11 | X, Y axis servo motor power | 2*2KW |
| 12 | X, Y axis feeding speed | 20m/min |
| 13 | Punching speed | 50-55 Times/Min |
| 14 | Total weight of equipment | 6T |
| 1 | Power supply | 3 Phase 4-Wire System |
| 2 | Voltage | 3 Phase 415V±10% |
| 3 | Frequency | 50Hz |
| 4 | Operating Temperature | 0ºC-40ºC |
| 5 | Relative Humidity | <90% no condensation |
| 6 | Compressed Air | Pressure: 0.8MPa Flow rate: 0.1m³/min |
| Main Parts Of Machine | Photos | Features Introduction |
| Punching host unit | Driving mode: Hydraulic drive System. Application: Punching hole. The machine structures is welded with C-shaped steel plate, and the stress is removed by tempering heat treatment. The steel plate welded structure has good rigidity and strong anti-eccentric loading ability. |
|
| Punching and Pressing device | Driving Model: Hydraulic Drive System. Application: It is used to press the plate when punching to make the punched hole position accurate. Components: Composed of a material pressing oil cylinder, material pressing claws, winch shaft, etc. |
|
| Punching & Die Selection Device | Driving Model: pneumatic drive System. Application: Used to select the die position for punching operations of the corresponding die position. Three die positions correspond to three punches, and each die position is equipped with a cylinder. A cushion block is connected to the cylinder piston rod, and the cushion block is installed between the punch rod and the cylinder pressure head. According to computer instructions, the punch is automatically selected, that is, the corresponding cylinder is selected to push the corresponding cushion. |
|
| Punching rod guide | Application: Fixed punch rod and guide when the punch rod moves up and down. Components: Composed of indenter, punch rod seat, guide seat, etc. |
|
| Y axis moving unit | Driving mode: Panasonic servo motor drive system. Transmission mode: Precision screw transmission. Protection measures: The sheet metal shield prevents the servo motor from being polluted by dust. |
|
| X axis moving unit | Drive mode: Panasonic servo motor drive system. Transmission mode: precision screw transmission. Protection measures: The sheet metal shield prevents the servo motor from being polluted by dust. |
|
| Clamp assembly | Drive mode: hydraulic drive. The clamp is installed on the sliding plate, and the position of the clamp can be moved along the X axis to adapt to different sizes of workpieces. The clamp clamps the plate and moves on the worktable to punch out the programmed hole. |
|
| CNC electrical cabinet | Application: Control system. Components: It is composed of host computer, power supply, servo amplifier, transformer, PLC module, etc. You only need to input the size of the workpiece to automatically generate the processing program, and also accept the workpiece processing program generated by the lofting software. It can be stored, recalled and displayed at any time by part number. |
|
| Hydraulic station | Application: The power source of the equipment. Components: Three-phase asynchronous motor, accumulator, oil tank, hydraulic pump, etc. |
| No. | Commodity&Specification | Qty | Mark/Note |
| 1 | Punch rod (including nut) | 1 Set | Accessories |
| 2 | Prefix (number, English) | 1 Set/Each | Including installed on the machine |
| 3 | Upper jaw, lower jaw | 2 Pcs/Each | Accessories |
| 4 | Punch (φ17.5, φ21.5, φ25.5) | 1 Pcs/Each | Including installed on the machine |
| 5 | Die (φ19.5, φ23.5, φ24.7, φ27.5, φ28.7, φ29.5) | 1 Pcs/Each | Including installed on the machine |
| 6 | Quick change drill chuck | 1 Set | Including installed on the machine (only available for YBJZ100 model) |
| 7 | Typing pad | 1 Pcs | Accessories |
| 8 | Open-end wrench | 1 Pcs | Opening 41mm |
| 9 | Hexagonal Wrench | 1 Set | |
| 10 | "" screwdriver | 1 Pcs | |
| 11 | "" screwdriver | 1 Pcs | |
| 12 | Proximity switch | 2 Pcs | |
| 13 | Air torch | 1 Pcs | |
| 14 | Mechanical manual | 1 Set | |
| 15 | Electrical manual | 1 Set | |
| 16 | Packing List | 2 Set | Attached to the manual |
| 17 | Certificate | 2 Pcs |
){kind=link}