| Customization: | Available |
|---|---|
| After-sales Service: | on Line and to Door Service |
| Warranty: | Two Years |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| No. | Item | PMZ2016H |
| 1 | Size of machine(mm) | 5000x3000x2900mm |
| 2 | Number of machine bed frame | 1 Set |
| 3 | Number of Gantry frame | 1 Set |
| 4 | Number of Spindle heads | 1 Set |
| 5 | Air-actuated control System | 1 Set |
| 6 | Hydraulic control System | 1 Set |
| 7 | Automatic Chip removal | 1 Set |
| 8 | Circulation Cooling system | 1 Set |
| 9 | Electrical System | 1 Set |
| 10 | The part responsible by purchaser | Embedded plates and anchor bolts required for the cement foundation and equipment of the installation site shall be prepared according to the foundation drawing provided by the supplier |
| 1 | system | YOKOGAWA |
| 2 | Driving system | Panasonic servo motor |
| Item | Model | Unit | PMZ2016H | |
| Max working size | Length x width | Mm | 2000×1600mm(Maximum) | |
| Overlay thickness | Mm | 100 | ||
| Drilling spindle | Number of spindle | Pcs | 1 | |
| Morse taper of spindle | BT50 Taper hole | |||
| Variable speed method | Inverter infinitely variable speed | |||
| Speed of spindle | R/min | 30-3000 | ||
| Stroke length of vertical ram drilling head | Mm | 350 | ||
| Drilling diameter | Mm | Φ12-Φ50 | ||
| Spindle motor power | KW | 15.0 KW | ||
| Servo motor feeding power | KW | 2.0 KW | ||
| Workpiece hydraulic clamping | Hydraulic pump pressure/flow | Mpa/L/Min | 6.5MPa/22L/min | |
| Hydraulic pump motor power | KW | 2.2 KW | ||
| Hydraulic clamp clamping force | KN | 7.5 KN | ||
| Number of clamping cylinders | Pcs | 12 Pcs | ||
| Electric control | Y axis | Y axis travelling | Mm | 2000Mm |
| Y axis moving speed | M/min | 0-10 M/min | ||
| Y axis servo motor power | KW | 2.0 KW * 2 | ||
| X axis | X axis travelling | Mm | 1600Mm | |
| X axis moving speed | M/min | 0-10 M/min | ||
| X axis servo motor power | KW | 1.5kw | ||
| Z axis | Vertical ram feed motion (Z axis) stroke length | Mm | 180mm | |
| Z axis moving speed | M/min | 0-5.0 M/min | ||
| Z axis servo motor power | KW | 2KW with brake | ||
| Drilling precision | Positioning Precision in "X" and "Y" axis | Mm | ≤0.08mm/Entire Journey | |
| Re-positioning precision in "X" and "Y" axis | Mm | ≤0.04mm/Entire Journey | ||
| Pneumatic system | Compressed air storage pressure | MPa | ≥0.5MPa | |
| Chip removal and cooling System | Chip conveyor type | Steel flat chain | ||
| Number of chip conveyors | PCS | 1 Pcs | ||
| Chip removal speed | M/min | 1 M/min | ||
| Chip conveyor motor power | KW | 0.75 KW | ||
| Cooling pump motor power | KW | 0.25 KW | ||
| Cooling box volume | L | 200 L | ||
| Automatic lubrication System | Lubrication pressure | MPa | 2.0 MPa | |
| Lubrication point oil volume | ML | 0.1 ML | ||
| Lubrication Cycle | Minutes | 6-10 min | ||
| Electrical System | CNC Controller System | YOKOGAWA | ||
| Number of CNC Axis | 3 Axis | |||
| Machine size | LxWxH | Mm | 5000x3000x2900mm | |
| Total motor power | KW | About 25KW | ||
| Machine Bed weight(appx) | T | More than 8.5 Tons | ||
| Shipping with Container | 1 x40 ft Container | |||
| 1 | Power | three-phase and four-wire system |
| 2 | Voltage | 380V±10% |
| 3 | Frequency | 50Hz |
| 4 | Working Temperature | 0ºC-40ºC |
| 5 | Relative humidity | <90% non-condensing |
| 6 | Compressed air | Voltage:0.4MPa |
6.FAQ
){kind=link}